How to create this Wall ?

Anonymous · ‎2008-12-03

Hi all,
I wonder how to create this wall? Using complex profile or a simple wall tool or something else?
Please advise.
Many thanks
p.s. This wall is the the side wall of a disable ramp.

Anonymous · ‎2008-12-03

put your wall in with the height of the highest point. then place a roof surface over it at the cut angle you want and then trim to roof (under design)

Anonymous · ‎2008-12-03

Hi,
That's one way.Many thanks
Do you know other alternatives? More simple like in sketchup that we can just drag points/hot-spot or something ?
thanks

Dennis Lee · ‎2008-12-03

You could draw that wall's elevation view in Complex Profiles, and draw the wall in the short direction.

ArchiCAD 25 & 24 USA
Windows 10 x64
Since ArchiCAD 9

Fran_ois Chatelain · ‎2008-12-03

Hi Tran,
if you don't need openings in it, simply use the mesh tool with sharp edges.

Cheers
Francois

François Chatelain
Worldwide Digital Imaging
Formerly posting as RanXerox
"A little bump will help blur your reflections"

Anonymous · ‎2008-12-03

Hi,
It does not need any opening. thanks

Anonymous · ‎2008-12-03

Hi all,
Many thanks for your inputs. All are great help. They all work.
Cheers,

Link · ‎2008-12-03

tranthainguyen wrote:
Hi,
It does not need any opening. thanks

Well that's ironic, because you could actually use an opening (with an inclined sill) to cut that shape out of the wall.

Cheers,
Link.

Anonymous · ‎2008-12-04

Dennis wrote:
You could draw that wall's elevation view in Complex Profiles, and draw the wall in the short direction.

When i do that it wont show the wall if i cut a section thru it.

Dennis Lee · ‎2008-12-04

I had to try it to see, but as you can see, it does show no matter which way you cut the section. The wall is drawn in the short direction as I was saying.

ArchiCAD 25 & 24 USA
Windows 10 x64
Since ArchiCAD 9

Find the next step in your career as a Graphisoft Certified BIM Coordinator!

How to create this Wall ?

Still looking?

Browse more topics

See latest solutions

Start a new discussion!